StarTechcom SATSAS225ODD User Manual

Instruction Manual  
4 Drive Removable 2.5in SATA/SAS Backplane  
Dual 2.5in SATA/SAS Removable Hard Drive + Slim Optical Drive Backplane  
SATSAS425BK  
SATSAS225ODD  
DE: Bedienungsanleitung - de.startech.com  
SATSAS425BK  
FR: Guide de l'utilisateur - fr.startech.com  
ES: Guía del usuario - es.startech.com  
IT: Guida per l'uso - it.startech.com  
NL: Gebruiksaanwijzing - nl.startech.com  
PT: Guia do usuário - pt.startech.com  
Packaging Contents  
• 1 x 5.25in bay backplane  
• 1 x SATA to LP4 Molex power cable  
• 1 x Set of keys  
• 1 x Package of mounting screws  
• 1 x Instruction Manual  
*actual product may vary from photos  
System Requirements  
• Computer case with available 5.25in front bay  
• Available SATA or LP4 Molex power connector from power supply  
• Internal SATA or SAS controller  
NOTE: SATA drives can be used on SATA or SAS controllers, but SAS  
drives can only be used on SAS controllers  
• SFF-8087 mini-SAS cable  
• 7-pin SATA cable (SATSAS225ODD only)  
Installation  
5.25in Backplane  
1.Turn your computer off and any peripherals connected to the  
computer (i.e. Printers, external hard drives, etc.). Unplug the  
power cable from the rear of the power supply on the back of the  
computer and disconnect all peripheral devices.  
2.Remove the cover from the computer case, including any covers  
for the 5.25in front bay. Refer to documentation for your computer  
system for details.  
SATSAS225ODD  
3.Insert the 5.25in backplane into the front bay. Align the mounting  
holes along the sides of the backplane, with the mounting points  
of the computer case’s 5.25in bay.  
4.Fasten the backplane to the computer case (see documentation  
for the computer case for details).  
5.Connect an available LP4 Molex power connector from the system  
power supply to the rear of the backplane.  
*actual product may vary from photos  
NOTE: If the computer system only has SATA power connectors, use  
the included SATA to LP4 Molex adapter cable.  
6.Connect an SFF-8087 cable into the rear of the backplane and  
connect the other end to the SATA or SAS controller.  
7.SATSAS225ODD: To use the optical drive bay, connect an  
additional SATA 7-pin cable from the rear of the backplane to a  
SATA controller port.  
8.Place the cover back onto the computer case.  
9.Insert the power cable into the socket on the power supply and  
reconnect all other connectors removed in Step 1.  
Manual Revision: 06/07/2011  

Toshiba W7 User Manual
Sony Memory Stick Camera Application Version 10 User Manual
Sony Ericsson P990i User Manual
Sony CDP CX270 CDP CX90ES User Manual
Seagate BARRACUDA ATA FAMILY ST328040A User Manual
Samsung SPINPOINT HS122JF User Manual
Samsung SPH A620 User Manual
Samsung MD65C User Manual
Samsung 20040611192609281 User Manual
Nokia 8390 User Manual