Airlink101 Computer Hardware AWLH6075 User Manual

Wireless N PCI Adapter  
Model # AWLH6075  
User’s Manual  
Rev. 1.0  
 
1. Introduction  
Congratulations on your purchase of the Wireless N PCI Adapter. Its high bandwidth  
combined with extended wireless coverage delivers fast and reliable connection for all  
of your networking applications especially when used with other Airlink101® Wireless  
N, Wireless 300N products.  
A full range of security features such as WEP, WPA-PSK, and WPA2-PSK provide the  
highest level of wireless network security. The bundled Wireless Monitor utility allows  
you to set up the adapter with an easy-to-use user interface. Best of all the Wireless N  
PCI Adapter works with 802.11 b /g / n network devices ensuring compatibility with  
your existing wireless products.  
1.1 Package Contents  
Before you begin the installation, please check the items of your package. The  
package should include the following items:  
Wireless N PCI Adapter  
2 Antennas  
Quick Installation Guide  
Installation CD (Driver/Utility/Manual)  
1.2 Features  
IEEE 802.11n draft specification 2.0 delivers the highest wireless data rate  
2 external antennas for wider coverage and continuous connectivity eliminates  
dead spots  
Wi-Fi Protected Access (WPA2 and WPA) support provide full protection for  
your wireless connection  
Security Push Button for easy connection to the existing wireless network  
Higher signal strength increases the reliability and stability of wireless  
connections  
Great for environments with higher wireless data traffic requirements  
Fully backward-compatible with 802.11b/g devices  
Works best with other AirLink101® Wireless N, Wireless 300N products  
2
 
2. Install the Wireless PCI Adapter  
Step 1 SWITCH THE COMPUTER OFF, remove the cover and insert the wireless PCI  
adapter into an available PCI slot of your computer.  
Step 2 Fasten the 2 antennas to the antenna connectors on the wireless PCI adapter.  
Step 3 To improve radio reception, please adjust antennas to the position shown in  
the following picture.  
Step 4 Switch on the computer.  
Step 5 Click Cancel when you see the Found New Hardware Wizard.  
(Windows XP)  
(Windows Vista)  
3